Winters 60100 Falcon IMCA Modified Circle Track Racing Transmission w/ Stand

Description: IMCA Approved for Stock Car, Modified, and Late Model classes, Features two forward speeds (2.4:1 Low Gear, direct-drive 1:1 High Gear with minimal rotating mass), neutral, and reverse, Comparable dimensionally to Muncie, T-10, and other similar transmissions - and that includes the 1-3/16” x 27-spline output shaft, which by design contributes to the most positive high gear retention in the industry, Frictionless bearings support all rotating components for unmatched durability, and as with all Winters transmissions, all rotating internals, from gears to shafts, are REM-finished, With its aluminum case and extension housing, the transmission weighs just 45 pounds Falcon Racing Transmission For 2 Piece Rear Main With Free Stand Sku # 8026010 Mfr. Part # 8026010 Condition New Brand Falcon Transmission Sold Kit Details Info The Falcon Late Model transmission has two forward speeds, neutral, and reverse, with an integral hydraulically-applied clutch operating low and reverse gears. High gear is a direct-drive 1-to-1 ratio with minimal rotating mass. With its aluminum case and extension housing, the transmission weighs just 45 pounds. It’s comparable dimensionally to a Muncie, T-10, and other similar transmissions—and that includes the 1-3/16” x 27-spline output shaft, which by design contributes to the most positive high gear retention in the industry. It comes with the correct crank coupler for easy installation—even to a stock flywheel housing. Frictionless bearings support all rotating components for unmatched durability, and as with all Winters transmissions, all rotating internals, from gears to shafts, are REM-finished. IMCA Approved for Stock Car, Modified, and Late Model classes Includes Chevy Early Small Block (Pre-1986 2-Piece Rear Main) 18 Spline Crank Coupler (Winters 62407-62901-62348-18) Internal wet clutch saves the cost and rotating mass of a "stock" type clutch, no torque converter or pressure plate required. Hydraulic clutch pedal required All rotating internals, from gears to shafts, are REM-finished Strong enough to hold up through the low-900 HP range Extension Housing includes a sturdy roller bearing to accommodate 1-1/2 inch diameter slip yokes 9 inch yoke permits 7-1/2" of yoke travel while maintaining a minimum of 1-1/2" of spline engagement Measure 21-5/8" from bellhousing flange to end of tail housing 1-3/16 x 27 spline output shaft Two forward speeds Specs Sold in Quantity Each Transmission Speeds 2-Speed Case Material Aluminum Gear Ratio (Low) 2.40:1 Gear Ratio (High) 1.00:1 Output Shaft Spline Count 27 Bellhousing Included No Yoke Included No Shifter Included No Input Shaft Spline Count 18 Notes 1.62"-18 spline input shaft. 1-3/16"-27 spline output shaft. MFG. Part # 8026010 Reviews Great Product Rated by JD on December 22, 2020 Summary: Great Product delivered fast and efficient Yes, I recommend this product. great Trans for the money Rated by Travis on March 13, 2020 Summary: Easy install great trans for the money Yes, I recommend this product. have bought two of these Rated by ed on April 09, 2019 Summary: n/a Yes, I recommend this product. nice and easy install Rated by SuperDave on October 30, 2018 Summary: great install the transmission take a little time to get used to and shifting Yes, I recommend this product. Related Items / Suggested Parts Billet Aluminum Shifter For Falcon Racing Transmissions Falcon Transmission 62348-18 Steel Drive Flange w/ 55-85 Chevy Crank Falcon Transmission 62350-18 Steel Drive Flange, w/1986-Up Chevy Crank Falcon Transmission 60115L Shifter Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 73 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 1965.99 USD

Location: Lincoln, Nebraska

End Time: 2025-01-24T12:02:20.000Z

Shipping Cost: 0 USD