QTY 2 Gen 2 HoopTech Cap Frame & QTY 1 T-Bar Gage FOR RICOMA RCM-1501TC-7S

Description: QTY 2 Gen 2 HoopTech Cap Frame & QTY 1 T-Bar Gage FOR Ricoma Tajima Melco ZSK (RICOMA RCM-1501TC-7S) You Get: 2 Hat Hoops ( GEN 2 ) 1 TBAR Framing Guage HoopTech Dream Frame Cap Frame & T-Bar Gage for Ricoma Tajima Melco ZSK ****NOTE*** YOU WILL NEED TO ALREADY HAVE A HAT DRIVER FOR THIS TO WORK ON YOUR MACHINE. DO NOT PURCHASE THIS IF YOU ARE NOT 100% CERTAIN YOU HAVE THE PROPER DRIVER ON YOUR MACHINE >>> PLEASE CALL US IF YOU ARE NOT SURE “GEN 2” from Hoop TechTHE BEST CAP FRAME SOLUTION FOR SEWING ON FINISHED CAPSThe GEN 2 from Hoop Tech is the next generation HTP style cap frame. Originally called The Dream Frame, the GEN 2 was redesigned to allow sewing closer to the bill than ever before. And it is the easiest cap frame that we have ever made to frame all styles of caps, even visors! The new “GEN 2” from Hoop Tech is the next generation EMS style cap frame. It was specially designed to maximize the sewing field on the front two panels of a finished cap, while still maintaining registration. This cap frame is lighter, has backing holding clips, is easier to frame, and with the new bill retaining strap you can sew closer to the bill than ever before. The GEN 2 works with all types of caps: Structured – Unstructured – Low Profile – Full Crown – Strap Back – Flex Fit – Fitted – Flat Bill – Pre-curved – New Era – Pacific – Nylon – Military Style. And don’t forget VISORS! (With and without sweatbands) Now, finally an easy way to hold and sew visors! Full field sewing access with no bill restriction. Don’t settle for putting your design just where you can get it to sew, Put your design where it looks good!The new “GEN 2” features include: – A spring steel bill retainer that sets and holds the bill angle. – Backing clips to hold your stabilizer in place during framing. – Internal retaining fingers for proper bill alignment. – Lighter frame design (20% less weight) than the original. – Redesigned bill retainer with closer access to the bill. – Open design Top Clamp. – Large sewing field. The EMS / Hoop Tech Cap Frames are built tough to stand up to day to day production use. The heavy gage stainless steel construction will give you years of service. The EMS / Hoop Tech Cap frame design allows for variation in cap size, shape and material thickness. When used with the Hoop Tech patented “T”-Bar Framing gage, framing a finished cap becomes as easy as 1-2-3. The Patented “T”- BAR Framing Gage The EMS / Hoop Tech T-BAR framing gage is the first step to properly framing up a finished cap. The T-BAR Framing Gage featuring the exclusive T-Bar Tensioning Arm, allowing the embroiderer to stretch the front panels of the cap against the top of the gage so that when the cap is clamped by the cap frame it is held in the ideal position for sewing. The framing gage with its lever arm, gives the cap framer a 10 to 1 mechanical advantage when getting the cap to lay flat before sewing. This saves a great deal of energy when framing up large orders. Only Hoop Tech has the patented Tensioning Arm. The Tensioning Arm gives even the inexperienced cap framer the ability to frame a cap tight…..even low profile un-constructed caps. It’s the easiest way to stretch a cap tight. Once you try it, you’ll be amazed at how easy it can be to frame a cap. The T-BAR Framing Gage allows the cap framer to pull the cap panels down flat against the surface of the gage. While the cap and backing are sandwiched the Cap Frame is latched, and the cap and backing are locked into place. This marriage of cap and backing is what allows the Hoop Tech Cap Frame to hold the best registration in the business.

Price: 1158 USD

Location: Meridian, Mississippi

End Time: 2023-11-05T18:51:43.000Z

Shipping Cost: 0 USD