[Non-universal] Fromann Lift Chair Part Metal Connector only for DeltaDrive o...

Description: NOTE: This part was left hand threads, will not work on lift chair motors. Please confirm whether the product size is the same before placing an order, if it is not the same, it cannot be replaced. This will only fit an DeltaDrive actuator; please do not order this part if you have, as it will not fit those model actuators. I know, some of you are thinking that "this iot doesn't know what he is talking about, this part looks just like mine so it should work..." This is a metal connector that screws onto the end of an DeltaDrive stroke tube (the tube that moves in and out of the actuator); the connector goes in between lift/recline brackets, and a clevis pin goes through all that to hold it to the frame of the chair. You may be right about the "idiot" part, but I am right about what it will fit... This part has reverse, or "left hand" threads, so you turn it counter-clockwise to tighten it. and it has standard, or right hand threads. The Dewert connectors are about half the diameter of this . If the part broke off in the stroke tube, as it normally does, just be careful when you are getting the piece out that broke off in the tube so as not to damage the threads. [Non-universal] Metal Connector That Screws Into End of Stroke Tube on DeltaDrive Actuator This part was left hand threads, please confirm whether the product size is the same before placing an order, if it is not the same, it cannot be replaced This part will not work on lift chair motors The length of part is 60mm, designed for DeltaDrive Actuators, will not work on fbs motor Please See Product Description Section Below for More Information

Price: 20.51 USD

Location: Sacramento, California

End Time: 2024-09-03T04:31:21.000Z

Shipping Cost: 0 USD