KZYEE KM10 PowerScan Electrical Automotive Circuit Tester Tool 12V/24V AVOmeter

Description: About this itemThe KZYEE KM10 Power Scan Kit is the most revolutionary circuit tester that performs any type of service, such as testing for continuity, diagnosing circuit failures, checking good and bad grounds, activating components on and off the vehicle, sensing MIN /MAX voltage, etc.Unlike other circuit testers that only have a few basic functions and require you to use various tools to troubleshoot electrical system problems, our Power Scan Kit performs a series of services in depth and speeds up diagnosis for you. The voltage resolution is 0.1V, KM10 allows accurate diagnosis of DC Voltage, AC Voltage, Resistance and Diode of 12v-24v electrical systems by simply pressing the mode button.With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. In addition, it can perform continuity checks and resistance checks, the two most important parameters to track the path of the automotive circuit and know which parts of the circuit are complete and which are broken. Powered by the car battery or cigarette lighter, no extra battery or cable required.The 20 foot extension cord will get you anywhere in your vehicles, trucks and trailers (12V-24V), allows you to test along the entire length of the vehicle without constantly searching for suitable vehicle grounds. Plus, the built-in flashlight is bright enough to illuminate your work area.Knows how to immediately check for bad ground contacts and quickly track down shorts without losing fuses. Also, the unit provides higher safety for the user, as it is protected by a circuit breaker, which is a safe measure to protect the unit and your components from overload.Product DescriptionThe KZYEE KM10 Power Scan Kit is the most revolutionary circuit tester yet, operating at 12-24 volts. With voltmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and ground fault indicator, the Power Scan is indeed the ultimate in performance and affordability, allowing users to check circuits in a single step.What are the advantages of the product？ Detection of min/max voltage; Detecting short circuits without wasting fuses.The 8-amp input is protected by a circuit breaker.With a flip of the switch, you have an instant hot lead or ground lead.Use the probe tip and ground lead simultaneously to power components right in the palm of your hand.With the 20ft. extension cord, you can test bumper to bumper without jumper cables.Instantly test components for continuity and identify positive, negative and open circuits without re-polarising the terminals. FAQQ: Where can I find the probe tip?A: We keep the probe above the back of the device. (Warm note: Be more careful when operating because of the sharp probe tip.)Q: Why can not the probe tip itself stay engaged? It keeps falling out.A: You need to push it a little harder until you hear a "CLICK" sound, then it will stay engaged.KM10 Electrical System TesterMain FeaturesContinuity TestingTesting of signal circuitsTesting trailer lightingCheck voltage and polarityLocate short circuitsTesting relays and componentsTesting bad ground contactsAcoustic monitoring of electrical signalsActivating the components in your hand and in the vehicle When you flip the power switch, you can check the voltage and polarity. It turns on components such as windows, lights, starter, wipers, etc. At the same time, use the hot lead and ground wire to activate items directly in your hand.KM10 Test Tool Specifications DC voltage range: 0-65V +1digit Resistance range: 0-100 kΩ Rated current: 1-10 amps Frequency response of sound passage: 0Hz to 10Khz.KM10 has more highlights than other circuit testers.Resistance Test: While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.Diode Test: In this mode, the probe tip contact the positive terminal of the diode, connect the auxiliary ground lead to the negative terminal of the diode, the screen will display the forward voltage drop, indicates the forward bias. If exchange the probe tip and auxiliary ground lead, the screen will not display the voltage, indicates the reverse bias.Signal Circuit Testing: Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool.Testing Trailer Lights and Connections: While the tool in DC Voltage mode, clip the auxiliary ground lead to the trailer ground , probe the contacts at the jack and then apply voltage to the probe tip. This lets you check the function and orientation of the connector and trailer lights.Red/Green Polarity LED: The Red/Green Polarity LED lights up when the probe tip voltage matches the battery voltage within ±0.4 volts. It is added information that could be valuable to the technician.Auto Circuit Breaker: The tool is short-circuit protected. Its internal circuit breaker will trip if it becomes overload. The circuit breaker is a valuable test tool as well as a safety measure to protect the tool from overload. Can do more than a multimeter Simply select the diagnostic mode by pressing the mode button, then touch the probe tip to a circuit. The LCD will display the DC /AV voltage, resistance. It helps find the cause to the problem quicker than using a multimeter.Short-circuit locator, ground-fault checker. KM10 tracks and locates shorts without having to move panels, trim or carpet to expose wires. Do not waste any more fuses. Test bad ground contacts instantly without performing voltage drop testsNo additional battery required Two power sources. Plug the KM10 directly into the cigarette lighter or battery electrode and you are ready to go. A large, backlit screen, with LCD display, it helps automotive technician, engineer or DIY enthusiast see the readings better even in dark areas. On Oct 10, 2024 at 04:49:29 PDT, seller added the following information:

Price: 68.99 USD

Location: Houston, Texas

End Time: 2024-10-20T10:46:31.000Z

Shipping Cost: 0 USD