JAYO 10KG Standard Resin 405nm UV-Curing Photopolymer LCD 3D Printer Resin

Description: FAST CURING - Standard resins have a good flow for fast, successful printing and easy cleaning, JAYO resins are designed to reduce moulding time without compromising on quality. HIGH PRECISION, LOW SHRINKAGE - JAYO 3D printing resins have been developed for low-shrinkage, high-precision printing. Its low warpage and dimensional stability are particularly suitable for precision parts. It brings a smooth surface and high resolution to the printed model, making it an excellent choice for 3D printing. HIGH COMPATIBILITY - JAYO standard 3D printer resins have been tested on different brands of 2K 4K 6K 8K LCD/DLP/SLA 405nm printers and are highly compatible with most LCD and DLP 3D printers, making them quick to use even for beginners. LOW ODOUR AND EASY CLEANING - JAYO fast resin produces very little odor during the 3D printing process, while its low odor will not leave your place smelling bad. After printing, clean it with an air gun using an alcohol spray to avoid sticking to the model after printing. PACKAGING AND SERVICE - Our 3D resin bottles come with bubble wrap and leak-proof caps to ensure no leaks, complete with paper funnels for recycling the resin to isolate impurities for use. If you have any questions, please contact us and we will be happy to help you with your problem as soon as possible. JAYO 405nm Standard Photopolymer UV Resin for LCD/DLP/SLA 3D Printers Exposure time : RGB LCD Screen : Bottom Exposure:20-80s Normal Exposure:4-15s Monochrome Screen : Bottom Exposure:10-60s Normal Exposure:1.5-4s Shore hardness: 80-85D; Shrinkage: 7-9 Viscosity (25°C): 210-400MPa-s Liquid density: 1.05-1.25g/cm3 Density of solids: 1.195 g/cm³ Flexural strength: 35±10%MPa Elongation capacity: 20-40 Mpa Elongation at break : 5±10 Shelf life : 12 months Bright colourJAYO standard 3D resin uses high quality formulation technology to develop multi-coloured resin products with low odour and high flow properties Black, White, Grey, Beige, Green, Orange, light Green, light blue, light red. Low shrinkageThe shrinkage rate of JAYO Resin is between 7 and 9% and the printing effect is good. Once cured, it can retain the three-dimensionality of the model for a long time, which is a good manifestation of the fact that you are making full use of your imagination. High stabilityJAYO brand resins are compatible with most 405nm LCD/SLA/DLP resin printers on the market due to their excellent performance for general modelling and industrial prototyping. Important safety instructions: Shake bottle before use Recommended temperature 20°C - 25°C Protect from dust and direct sunlight. Keep it out of reach of children. Avoid contact of the liquid resin with the skin and eyes. In case of contact with skin, rinse immediately with plenty of water. On 17-Aug-2022 at 14:45:16 BST, seller added the following information:

Price: 133.78 USD

Location: Hebron, Kentucky

End Time: 2024-10-06T08:11:52.000Z

Shipping Cost: 0 USD