Description: Suits XA, XB, etcThese belts have been custom made for us by PRB to match the original belt supplied with the Acoustic Research turntables. The measurement was made against a mint unused AR original belt. They are thoroughly tested and work flawlessly at BOTH speeds. Money back guarantee if not completely happy.They are 24.4” x 0.135” x 0.03”. They are not to be confused with the 23.6” belt sold by many vendors for these vintage AR turntables. The 23.6” belt is about 2cm too short. Not convinced of the risk? If you are using one of the smaller belts, check the platter level of your turntable. Also, with the bottom off and looking from below. Is the belt pulling the platter toward the pulley, i.e. are the springs leaning toward the pulley? The problem with the short belt is that the belt pulls the platter towards the drive motor and is prone to come in contact with it when you use the 45 rpm speed. In fact, the belt is way too tight to play 45s and the motor struggles to even turn as the tension is too great.In essence it can be so tight that it causes the platter to “tip”. Some people overcome this issue with the shorter belt by tightening the two rear suspension springs to prevent the platter hitting the deck and level the platter. Use a turntable bubble level to check. (We sell them too). However adjusting the springs is less than optimal because the correct isolation “bounce” is adversely affected. The springs in these turntables are softer than a Thorens or Linn, so correct length is much more critical.We keep stock of these belts. they are custom made to our specifications by PRB. You do not have to wait while we order stock from a supplier to then send on to you. Hence, quick delivery, 2-3 working days maximum in Australia.Please note that international postal deliveries may incur delays or additional costs at the destination. Please factor these in making your decision to buy. We are undeserving of poor feedback for matters that we have no control over.
Price: 24.9 AUD
Location: Blackwood, SA
End Time: 2024-11-27T07:56:20.000Z
Shipping Cost: 13.17 AUD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Colour: Black
Custom Bundle: No
Compatible Brand: Acoustic Research
Type: Belt
Modified Item: No
MPN: Does Not Apply
Non-Domestic Product: No
Model: AR size
Brand: PRB
