AMX Harman Professional Inc FGN2322-SA Amx Nmx-dec-n2322 Svsi N2300 Cpnt Series

Description: Condition:Brand New, Never Been Used. Original Packaging. Open Box - Only to check quality of inventory(Pieces connected for display purposes) Included:1X FGN2322-SA Amx Nmx-dec-n2322 Svsi N2300 Cpnt Series Specs:Overview The NMX-ENC-N2312 Encoder and NMX-DEC-N2322 Decoder provide a flexible, feature-rich, and simple-to-deploy Digital Media Distribution and Switching solution which can be used in 4K applications with resolutions up to 4096x2160, with support for HDCP 2.2. This motion-based wavelet codec solution delivers video with nearly imperceptible latency at an incredibly low 200 Mb/s bandwidth allowing 4K distribution over standard gigabit Ethernet networks. Any source can be sent to one or more displays by routing through layer 2 / layer 3 switches utilizing standard Cat5e cable. The NMX-DEC-N2322 includes standard features like output scaling, bi-directional serial, IR, embedded 7.1 audio, and KVM- over-IP extension. Features  Design Flexibility – Start as small as 1x1 and grow the system in increments of single sources and devices by simply adding additional encoders and decoders.  Power Over Ethernet (POE) – eliminates requirement for local power supply and speeds installation. Units can still be powered locally from 12VDC allowing for easy rack-mountable, high- density installations  Infrared (IR) – Emitter connection allows control of IR-only display devices  Fast Install – With Phoenix connectors for Power, IR, RS232 serial, and analog audio interfaces  Balanced and Unbalanced Audio – Embedded 7.1 digital audio or balanced/unbalanced analog audio  Multiple Connection Options – RJ-45 and SFP network connectors and HDMI video connections  KVM –Dual USB-A control for KVM applications  Native NetLinx – NetLinx Studio can easily recognize the deviceVIDEO Video Input Network video over Ethernet via RJ45 port or fiber via 1G SFP port Video Output HDMI 2.0, DVI-D (through adapter) Formats HDMI 2.0, DVI-D (through adapter), HDCP 2.2 content protection support Video Codec Motion-based wavelet technology Input Resolutions Supports most common resolutions from HD up to 4096x2160 See the instruction manual for the NMX-ENC-N2312 Encoder for all supported resolutions Output Resolutions 720p, 1080p, 4K30 or input resolution if scaler is disabled Output Scaling Note: there are no limitations when upscaling to 720p, 1080p, 4K30. A 4K30 signal can be downscaled to 1080p without issue. Scaling down to 720p from either 4K30 or 1080p is not supported in the product. Color Space 4:2:0 4K30 4:2:2 – HD LocalPlay/HostPlay 8 playlists HostPlay 1 image/list Note Jumbo Frames Required Video Wall Construction Supported within the NMX-DEC-N2322, the N2300 Series is not compatible with SVSI Windowing Processors at this time Network Video Recording Not compatible with SVSI NVR at this time AUDIO – SIGNAL TYPES Input Network audio over Ethernet via RJ45 Output Embedded audio on DVI-D or HDMI (through adapter), analog audio output KEYBOARD AND MOUSE Keyboard & Mouse Connect the Decoder to the keyboard and mouse, and an N2300 Series Encoder to the PC being controlled AUDIO - FORMATS Input Signal Types Network audio over Ethernet via RJ45 Output Signal Types Embedded audio on HDMI or DVI-D (through adapter) HDMI Audio Formats 8ch PCM Analog Audio Format Stereo 2-channel Audio Breakaway Supported LATENCY Latency 17-ms at 60fps for 1920x1080 and lower resolutions 34-ms at 30 fps for 4K30 4K resolutions NOTE: This is the combined encode plus decode latency. Total latency from source to screen will also include any network latency and screen latency. Scaling adds one frame of latency (17ms at 60fps). NMX-DEC-N2322 | 3 Switching Up to 1.5s delay, not seamless COMMUNICATIONS Ethernet P0 10/100/1000 Mbps, auto-negotiating, auto-sensing, full/half duplex, DHCP, Auto IP, and Static IP P1 1 Gbps SFP port which accepts compatible fiber transceivers or direct attach cables (fiber or copper cabling) HDMI HDCP, EDID management PORTS +12V 2A One 12 Volt DC power input P0 8-wire RJ45 female 10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port Provides network connection, network AV video, and power to the Encoders and Decoders (PoE power) P1 1-Gbps SFP+ port (SFP+ fiber transceiver or direct attach cable not included) Provides network connection and networked AV video IR OUT 2-pin terminal Phoenix connector. Provides Infrared (IR) output only (33-60 kHz; typically 39 kHz). Emitter may be necessary (not included). RS232 3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication. Available terminal speed settings: 9600-115200 baud rate. AUDIO 5-pin terminal Phoenix connector which provides user- selectable balanced/unbalanced output. HDMI OUT HDMI video output CONTROLS AND INDICATORS – FRONT PANEL RESET Button Recessed pushbutton Press to initiate a 'warm restart' causing the processor to reset, but not lose power A reset does NOT affect the current settings ID Button Recessed pushbutton Press to send a notification out on the network to identify the unit (the notification causes a pop-up dialog in N-Able and N-Command) POWER LED On solid (green) when operating power is supplied (via PoE or local power supply) This activity is also shown by the PWR LED on the rear panel STATUS LED On flashing (green) when there is software activity This activity is also shown by the STAT LED on the rear panel CONTROLS AND INDICATORS – REAR PANEL PWR LED Same as POWER LED described above HDMI LED On (green) when there is a connection to a valid display NMX-DEC-N2322 | 4 STAT LED Same as STATUS LED described above STRM LED On (green) when the unit is receiving video POWER SUPPLY Power Supply, External, Optional 2.0 Amp @ 12 Volts DC; 100-240 Volts AC power supply; optional NMX-ACC-N9312 (FGN9312) Power over Ethernet (PoE), External, Optional Can be powered via a PoE switch or other equipment with a PoE source Conforms to IEEE 802.3af Class 3 (802.3at Type 1) NOTE: In order for the unit to receive Power over Ethernet (PoE), it must be connected to a switch or other equipment that has a PoE PSE (Power Sourcing Equipment) port. Warning: Do not run wiring that is connected to a PoE PSE port outside of the building where the PSE resides. It is for intra-building use only. ENVIRONMENTAL Temperature 32° to 104°F (0° to 40°C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation Up to ~44 BTU/hr GENERAL Dimensions (HWD) 1.05” x 7.888” x 5.5” (2.67 cm x 20.04 cm x 13.8 cm) Weight 1.6 lbs (0.66 kg) Mounting Options Stand alone, surface mount, wall mount, or rack mount Surface and wall mounting requires (not included): •NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders Rack mounting requires (not included): •NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side for SVSI N-Series Encoders and Decoders Regulatory Compliance FCC, CE, and NTRL Recommended Accessories •NMX-ACC-N9312 (FGN9312), Power Supply 12V External •NMX-ACC-N9382 (FGN9382), 1RU Power Supply 16- Channel 12V for up to 16 SVSI N-Series Encoders and Decoders •NMX-ACC-N9101 (FGN9101), Mounting Wings for SVSI N-Series Encoders and Decoders •NMX-ACC-N9102 (FGN9102), 1RU Rack Shelf for Two Side-by-Side SVSI N-Series Encoders and Decoders Shipping & Handling:We only ship to the lower 48 states. Additional charges will apply for shipping to Alaska, Hawaii, or Puerto RicoInternational NO APO?s & FBO?s Bidders, please contact before biddingPickups are welcome

Price: 590.49 USD

Location: Anaheim, California

End Time: 2024-11-14T11:53:07.000Z

Shipping Cost: 0 USD