Description: 5 Ton Tri Zone Mini Ductless Split Air Conditioner 60000 BTU 60,000 BTU Ductless Mini Split AC 21 SEER Efficiency w/ Heat Pump Technology With a 60000 BTU total Cooling-Heating Capacity, this Inverter DC mini split system can cool or heat 3 seperate 18000-18000-24000 BTU zones [850 ft² + 850 ft² + 1100 ft²] for a total coverage area of 2800 ft². A 21 SEER rating coupled with Inverter technology provides the benefits of low operation temps, rapid cooling as well as maximum energy efficiency. Includes LCD remotes . System Features Specifications Installation Kit Setup - Installation Warranty Shipping Technical Data:System Includes: 60000 BTU Cooling Capacity: 18k + 18k + 24k60000 BTU Heat Pump Capacity: 18k + 18k + 24kINVERTER DC TECHNOLOGY: 21 SEER TRI-Zone Setup (3 Air Handlers)1 Year Warranty on all Parts View Details >5 Year Warranty on Compressor View Details > Indoor Units - Air Handler [x 3]Outdoor Unit - Compressor rated at 60000 BTU'sDigital, Multi-function LCD Remote Control [x 3]Filtration Screens - Multi Folds Evaporator Top Line Features:TRI Air Handlers for Multi-Zone PlacementINVERTER DC TECHNOLOGY: 21 SEER Intelligent Mechanical DefrostingWashable Filters - Biologically Actv EnzymeLow Startup Temps - MAXIMUM EFFICIENCYPre-charged with freon for 25' [x3] of pipingSleep Mode - 24 hour ON/OFF Timer - MemoriesEnhanced Copper Coil - Wide Angle Air Spread2800 ft² coverage area: 850 + 850 + 1100Flexible, Quick Installation - Easy Operation** Installation Lineset Sold Seperately: Available in 15-75ft Lengths. Contact us for customized package or Click here to Purchase. 18000 BTU Indoor Unit (air handler) specs: CLICK TO ENLARGE 24000 BTU Indoor Unit (air handler) specs: CLICK TO ENLARGE Outdoor Unit (compressor) specs CLICK TO ENLARGE WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling and heating technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. As known, the current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result different running speeds of the compressor. YMGI Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter air conditioners bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Contioners/Heat Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically. Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling or heating to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly. Once the set temperature is reached, it slows down and adjust its capacity to counter the heat loss or heat gain of the building. By this way it will maintain a constant temperature. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with Freon however, the lines still need to be vacuumed to evacuate the excess Nitrogen prior to the final coupling for operation. Although the installation may seem easy to some, certain tools and experience is necessary to complete installation of a mini split* See Installation Tip. A certified HVAC technician must conduct / complete the installation to be eligible for the warranty. (See warranty details below > ) *5 Year Compressor - 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Warranty Polices > These Mini Split units usually ship via SAIA Motor Freight (on truck) or some other freight service. These units ship out of Missouri and are in transit with 2 business days from payment receipt. Depending on where you are geographically located, transit time is usually between 3 and 6 business days. Please provide a contact phone# upon checkout where recipient of order can be reached. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Only ships to the lower 48 Contiguous United States. Swap 18k Wall Mount for Ceiling Cassettes: (+) $125Swap 24k Wall Mount for Ceiling Cassettes: (+) $145Swap all 3 Wall Mounts for Ceiling Cassettes: (+) $385 Swap 18k Wall Mount for Susp. Ceiling: (+) $248Swap 24k Wall Mount for Susp. Ceiling: (+) $298Swap all Wall Mounts for Susp. Ceiling Mounts: (+) $670*If alternate air handler types are preferred, request invoice with preferred options upon checkout or contact us. Customize your system to meet your requirements - see below table for available output options: Tri-Zone Setup 12k + 18k + 24k18k + 18k + 18k12k + 24k + 24k9k + 24k + 24k18k + 18k + 24k18k + 24k + 24k Quad-Zone Setup 9k + 12k + 12k + 24k9k + 9k + 18k + 24k9k + 12k + 18k + 24k9k + 12k + 18k + 18k9k + 18k + 18k + 18k12k + 12k + 18k + 24k12k + 12k + 12k + 24k12k + 12k + 18k + 24k9k + 9k + 24k + 24k Quint-Zone Setup 9K +9K +9K +9K + 12K/18K/24K9K + 9K + 9K + 12K + 12K/18K/24K9K + 9K + 12K +12K + 12K/18K/24K9K + 12K + 12K + 12K + 12K/18K12K + 12K + 12K + 12K + 12K/18K09K + 09K + 12K + 12K + 18K09K + 09K + 12K + 18K + 18K09K + 12K + 12K + 18K + 18K12K +12K + 12K + 18K + 18K Air handlers are available in 9k, 12k, 18k and 24k outputs. Be advised, for arrangements where combined output of all heads exceeds rated capacity of condenser (60000 BTU's) - the total output will not exceed 60000's when all air handlers are running at full capacity simultaneously. However, overated zones will draw required capacity from other zones either running at lower settings or areas that have reached thermostat settings to obtain rated output. For example, with a 12k-12k-12k-12k-18k configuration, the total output will be along the lines of 11k-11k-11k-11k-16k when all zones are running on high/full settings at the same time. However, once a zone obtains set temperature and/or operates at a lower setting, the capacity will bleed off into zone that needs the extra push to obtain the 12k-12k-12k-12k-18k yield.*If alternate air handler types / capacities are preferred, request invoice with preferred options upon checkout or contact us. View the Mini Split FAQ >View the Mini Split Outline Diagram >Click to contact us >
Price: 5108.4 USD
Location: Warren, Michigan
End Time: 2024-01-22T19:02:07.000Z
Shipping Cost: 225 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Number of Cool Speeds: Variable
Blower Motor Speed: Variable Speed
Size: 5 tons
Power Phase: 1 Phase
Material: Aluminum, Copper
Energy Star: Compliant
Power Source: Electric, Corded Electric
Type: Ductless Mini-Split with Heat Pump
Features: Ductless, Adjustable Thermostat, App Compatibility, Auto Cool, Digital, Digital Display, Drain Hose Connection, Eco-Friendly, Fan Only Option, Indoor/Outdoor, Rechargeable, Sleep Mode, Smart Connectivity
Smart Home Protocol: Infrared, Z-Wave
Color: White
Year Manufactured: 2019
MPN: Does Not Apply
Mounting Location: Wall
Number of Fan Motors: 1
Number of Heat Settings: Variable
Brand: Thermocore Systems
Manufacturer Warranty: Other: See Item Description
Compressor Type: Rotary & Impeller
Items Included: Drain Hose, Remote Control
Heating System: Heat Pump
Number of Compressors: 1
Voltage: 208/230 V
