1X 40K60W power adjustable ultrasonic transducer vibrator control board small

Description: 40K60W power adjustable ultrasonic transducer vibrator control board small ultrasonic cleaner generator model: 60W circuit board + 1 vibrator 120W circuit board + 2 vibrators 180W circuit board + 3 vibrators Adjustable power + potentiometer 40K 200-300W board (free of debugging) 40K200-300W board + display board + 4 vibrators 40K200-300W board + display board + 6 vibrators The main parameters of the circuit board: Power requirements: AC 110V (-15～+10﹪), 50Hz (need to be customized) AC 220V (-15～+10﹪), 50Hz Environment temperature: -10℃～40℃ Environmental humidity: 35～85﹪ Installation size: about 110x105x40mm Transducer frequency: 40KHz product advantages: 1. Power tube: imported power tube; 2. PCB: 2 ounces on both sides; 3. Stable working performance; 4. Large radiator, fast heat dissipation 5. Frequency 40Khz Instructions for wiring between circuit board and vibrating head: 1. In principle, the circuit board cannot be energized with no load and the vibration head is not installed and fixed; 2. Install it well. When cleaning, it is best not to energize for more than one minute without any cleaning fluid; 3. The 60W driver board is a vibrating head and connected to the circuit board terminal, a circuit board and a vibrating head are used together; 4. The 120W driver board is composed of 2 shaking heads and connected to the circuit board terminal, one circuit board and 2 shaking heads are used together; 5. The 180W driver board is composed of 3 vibration heads and connected to the circuit board terminal, a circuit board and 3 vibration heads are used together; 6. OUT+ is connected to the positive pole of the transducer (vibrator) (the positive pole in the middle of the two black chips), OUT- is connected to the negative pole of the transducer (vibrator), and the positive and negative poles of OUT are connected to the positive and negative poles of the transducer (vibrator) respectively. When connecting the poles, remember not to connect them wrongly. (Note: The voltage of the output terminal on the circuit board is about 200V. Pay attention to safety. It is better to have a leakage protection switch on the input power supply to ensure safety!) Note: This circuit board is only provided for DIY use by ultrasonic enthusiasts. Drawings and wiring diagrams are not provided. Do not take photos if you mind! Packing:1PC Warranty period: 120 days

Price: 36.08 USD

Location: shenzhen

End Time: 2025-01-09T04:01:32.000Z

Shipping Cost: 20 USD