Description: A high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. Designed for use in dry, interior, non-corrosive environments or temporary outdoor applications.The stainless-steel Titen HD is the optimal choice for applications in corrosive or extreme environments such as salt water, or when chemical or corrosive solutions are present. See Stainless-Steel Titen HD for more information.Key FeaturesTested in accordance with ACI 355.2, AC193 and AC106Qualified for static and seismic loading conditionsThread design undercuts to efficiently transfer the load to the base materialStandard fractional sizesSpecialized heat-treating process creates tip hardness for better cutting without compromising the ductilityNo special drill bit required — designed to install using standard-sized ANSI tolerance drill bitsHex-washer head requires no separate washer, unless required by code, and provides a clean installed appearanceRemovable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be movedReuse of the anchor will not achieve listed loads and is not recommendedMaterialCarbon steelFinishZinc plated or mechanically galvanizedNot recommended for permanent exterior use or highly corrosive environmentsInstallationDrill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus minimum hole depth overall (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.Insert the anchor through the fixture and into the hole.Tighten the anchor into the base material until the hex-washer head contacts the fixture.Titen HD Diameter (in.)Wrench Size (in.)Recommended Fixture Hole Size (in.)Min. Hole Depth Overdrill (in.)Suggested fixture hole sizes are for structural steel thicker than 12 gauge only. Larger holes are not required for wood or thinner cold-formed steel members.1/43/83/8 to 7/161/83/89/161/2 to 9/161/41/23/45/8 to 11/161/25/815/163/4 to 13/161/23/41 1/87/8 to 15/161/2 CautionHoles in metal fixtures to be mounted should match the diameter specified in the table below.Use a Titen HD screw anchor one time only — installing the anchor multiple times may result in excessive thread wear and reduce load capacity.Do not use impact wrenches to install into hollow CMU.Oversized holes in base material will reduce or eliminate the mechanical interlock of the threads with the base material and reduce the anchor’s load capacity.
Price: 22.07 USD
Location: Redding, California
End Time: 2023-10-05T02:20:08.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Non-Domestic Product: No
Brand: Simpson Strong-Tie
Type: Screw Anchor
Custom Bundle: No
Model: Titen HD
MPN: THD37500H
Modified Item: No
California Prop 65 Warning: Crude oil, gasoline, diesel fuel and other petroleum products can expose you to chemicals including toluene, benzene, and nickel which are known to the State of California to cause cancer and birth defects or other reproductive harm. These exposures can occur in and around oil fields, refineries, chemical plants, transport and storage operations such as pipelines, marine terminals, tank trucks and other facilities and equipment.
Available Variations
Color: 1/4" x 1-7/8" THDB25178H
Price: 22.07 USD
Available Quantity: 100
Quantity Sold: 2
Color: 1/4" x 1-7/8" THDB25178H
Price: 34.35 USD
Available Quantity: 100
Quantity Sold: 6
Color: 1/4" x 1-7/8" THDB25178H
Price: 52.75 USD
Available Quantity: 100
Quantity Sold: 5
Color: 1/4" x 1-7/8" THDB25178H
Price: 85.88 USD
Available Quantity: 100
Quantity Sold: 10
Color: 1/4" x 1-7/8" THDB25178H
Price: 196.32 USD
Available Quantity: 100
Quantity Sold: 5
Color: 1/4" x 1-7/8" THDB25178H
Price: 374.25 USD
Available Quantity: 100
Quantity Sold: 4
Color: 1/4" x 2-3/4" THDB25234H
Price: 22.07 USD
Available Quantity: 100
Quantity Sold: 0
Color: 1/4" x 2-3/4" THDB25234H
Price: 36.79 USD
Available Quantity: 100
Quantity Sold: 2
Color: 1/4" x 2-3/4" THDB25234H
Price: 57.67 USD
Available Quantity: 100
Quantity Sold: 2
Color: 1/4" x 2-3/4" THDB25234H
Price: 98.15 USD
Available Quantity: 100
Quantity Sold: 12
Color: 1/4" x 2-3/4" THDB25234H
Price: 227 USD
Available Quantity: 100
Quantity Sold: 0
Color: 1/4" x 2-3/4" THDB25234H
Price: 441.74 USD
Available Quantity: 100
Quantity Sold: 1
Color: 1/4" x 3" THDB25300H
Price: 22.07 USD
Available Quantity: 100
Quantity Sold: 19
Color: 1/4" x 3" THDB25300H
Price: 38.03 USD
Available Quantity: 100
Quantity Sold: 2
Color: 1/4" x 3" THDB25300H
Price: 58.88 USD
Available Quantity: 100
Quantity Sold: 4
Color: 1/4" x 3" THDB25300H
Price: 100.6 USD
Available Quantity: 100
Quantity Sold: 4
Color: 1/4" x 3" THDB25300H
Price: 231.9 USD
Available Quantity: 100
Quantity Sold: 4
Color: 1/4" x 3" THDB25300H
Price: 447.87 USD
Available Quantity: 100
Quantity Sold: 2
Color: 1/4" x 3-1/2" THDB25312H
Price: 23.31 USD
Available Quantity: 100
Quantity Sold: 0
Color: 1/4" x 3-1/2" THDB25312H
Price: 40.48 USD
Available Quantity: 100
Quantity Sold: 1
Color: 1/4" x 3-1/2" THDB25312H
Price: 61.34 USD
Available Quantity: 100
Quantity Sold: 0
Color: 1/4" x 3-1/2" THDB25312H
Price: 107.97 USD
Available Quantity: 100
Quantity Sold: 4
Color: 1/4" x 3-1/2" THDB25312H
Price: 241.72 USD
Available Quantity: 100
Quantity Sold: 0
Color: 1/4" x 3-1/2" THDB25312H
Price: 472.42 USD
Available Quantity: 100
Quantity Sold: 0
Color: 1/4" x 4" THDB25400H
Price: 23.31 USD
Available Quantity: 100
Quantity Sold: 5
Color: 1/4" x 4" THDB25400H
Price: 41.71 USD
Available Quantity: 100
Quantity Sold: 3
Color: 1/4" x 4" THDB25400H
Price: 63.8 USD
Available Quantity: 100
Quantity Sold: 1
Color: 1/4" x 4" THDB25400H
Price: 120.24 USD
Available Quantity: 100
Quantity Sold: 4
Color: 1/4" x 4" THDB25400H
Price: 251.54 USD
Available Quantity: 100
Quantity Sold: 2
Color: 1/4" x 4" THDB25400H
Price: 490.82 USD
Available Quantity: 100
Quantity Sold: 0
